중앙대 전기에너지응용 연구실(교수 노종석) | Electric Energy Application Laboratory of Chung-Ang University (Prof. Ro) - MEMBER

Dr. 노 종 석 (Jong-Suk Ro)

Education

'08 Electrical Engineering, Seoul National University (M.S. & Ph.D.)
'01 Mechanical Engineering, Hanyang University (B.S.)

Career

'21-Now Chung-Ang University, Department of Intelligent Energy and Industry, Adjunct Professor
‘19-Now Chung-Ang University, School of Electrical and Electronics Engineering, Associate Professor
'16-'19 Chung-Ang University, Assistant Professor
'13-'16 Seoul National University, BK Assistant Professor
'14-'14 University of BATH, United Kingdom, Academic Visitor
'13-'13 Korea Electrical Engineering & Science Research Institute, Researcher
'12-'13 Seoul National University, Post-Doctoral Fellow
'08-'12 Samsung Electronics Co. Ltd, Senior Researcher

Activities

'20-Now Editor, ELECTRONICS
'19-Now The Korean Institute of Electrical Engineers, Editor(Electrical Machinery)
'19-Now Editor, Special Issue of ELECTRONICS
'18-Now Samsung Electronics Co. Ltd., Expert and Lecturer
'19-'19 Institute of Electronics Engineers of Korea, Steering Committee
'18-'18 Trans. on Electrical and Electronic Materials, Co-editor Chief
'17-'18 The Korean Institute of Electrical Engineers, Editor(World of Electricity)

Honors/Awards

'21 Highest Grade in Research Achievement( S grade); within Top 5% professor (Chung-Ang University)
'20 Excel Award (Journal of Electrical Engineering & Technology)
'18 Excellent Young Researcher (Chung-Ang University)
'16 Excel Award (Journal of Electrical Engineering & Technology)
'09 Best Researcher (Samsung Electronics Co. Ltd.)
'06-'08 Scholarship (Samsung Electronics Co. Ltd.)
'06 Best Paper Award (1st author oral presentation at Int. Conf. on Electric Power Systems, High Voltages, Electric Machines)

Performance

[SCI papers]
• Total Publication: 93 (Lead/Corresponding author:86)
• Publication since Mar.2019: 49 (Lead/Corresponding author:49)(Q1 within top 25%:31)
• In addtion, in the Revision Stage after Submission: 17 (Lead/Corresponding author:17)(Q1 within top 25%:12)
• Publication during Graduate Course: 9 (Lead/Corresponding author:7)(Q1 within top 25%:6)

[Project]
• Since 2016: 17 (Principal Investigator: 11, Co-Investigator: 6)
• Project in Progress: 8 (Principal Investigator: 5, Co-Investigator: 3)

Links

Video about the Introduction of EEA Lab(Click)
News about the introduction of EEA Lab(Click)
University News about the development of new tech.(Click)
News about EEA lab(Click)

Publicationmore

Book

2. 최종필, 김중헌, 노종석, 손채봉, 안두성, 안희준, 이희영, 정현환 공역, "ANSI C 프로그래밍 8판 (PROGRAMMING IN ANSI C 8th Edition)", ISBN: 979-11-85294-31-5 93560, 학산미디어, January 2021.

1. Won Y. Yang, Wenwu Cao, Jaekwon Kim, Kyung W. Park, Ho-Hyun Park, Jingon Joung, Jong-Suk Ro, Han L. Lee, Cheol-Ho Hong, Taeho Im, "Applied Numerical Methods Using MATLAB", 2nd Ed. ISBN: 978-1-119-62671-8, New York, NY, USA: Wiley, March 2020.

SCI(E) Indexed Papers

• Total Publication: 93 (Lead/Corresponding author:86)

• Publication since Mar.2019: 49 (Lead/Corresponding author:49)(Q1 within top 25%:31)

• In addtion, in the Revision Stage after Submission: 17 (Lead/Corresponding author:17)(Q1 within top 25%:12)

• Publication during Graduate Course: 9 (Lead/Corresponding author:7)(Q1 within top 25%:6)

• List of SCI Indexed Papers

[Q1(within top 25%) ranking journal is marked]

[Corresponding author is indicated by the notation of * in the author's name]

[In Revision]

17. Jong-Suk Ro*, “Interior Permanent Magnet Synchronous Motor”, International Transactions on Electrical Energy Systems.

16. Jong-Suk Ro*, "Renewable Energy ”, IEEE Transactions on Power Electronics.[Top 8% Journal]

15. Jong-Suk Ro*, "Renewable Energy ”, IEEE Journal of Emerging and Selected Topics in Power Electronics.[Top 15% Journal]

14. Jong-Suk Ro*, “Interior Permanent Magnet Synchronous Motor”, IEEE Transactions on Energy Conversion.[Top 15% Journal]

13. Jong-Suk Ro*, “Switching Technique”, IEEE Transactions on Industrial Electronics.[Top 5% Journal]

12. Jong-Suk Ro*, “Magnetic-Geared Permanent Magnet Machine”, IEEE Access.[Top 22% Journal]

11. Jong-Suk Ro*, “Magnetic-Geared Permanent Magnet Machine”, IEEE Access.[Top 22% Journal]

10. Jong-Suk Ro*, “Synchronous Machines”, IEEE/CAA Journal of Automatica Sinica.[Top 16% Journal]

9. Jong-Suk Ro*, “Switching Technique”, IEEE Journal of Emerging and Selected Topics in Power Electronics.[Top 15% Journal]

8. Jong-Suk Ro*, “Axial Flux Permanent Magnet Machines”, Applied Sciences.

7. Jong-Suk Ro*, “Induction Machine”, IEEE Journal of Emerging and Selected Topics in Power Electronics.[Top 15% Journal]

6. Jong-Suk Ro*, “Induction Machine”, IEEE Access.[Top 22% Journal]

5. Jong-Suk Ro*, “Synchronous Machines”, International Transactions on Electrical Energy Systems.

4. Jong-Suk Ro*, “Induction Machine”, International Transactions on Electrical Energy Systems.

3. Jong-Suk Ro*, “HVDC”, The International Journal of Electrical Engineering & Education.

2. Jong-Suk Ro*, “Analyzer”, IEEE Access.[Top 22% Journal]

1. Jong-Suk Ro*, “Optimization Algorithm”, IEEE Transactions on Cybernetics.(4th Revision; Minor revision) [Top 0.7% Journal]

[2021]

13. Jong-Suk Ro*, “Axial Flux Permanent Magnet Machines”, Electrical Engineering, (Accepted).

12. Syed Sabir Hussain Bukhari, Hamza Ahmad, Faheem Akhter Chachar, and Jong-Suk Ro*, "Brushless Field-Excitation Method for Wound-Rotor Synchronous Machines", International Transactions on Electrical Energy Systems, (Accepted).

11. Reza Rahmani, Saleh Mobayen*, Afef Fekih, and Jong-Suk Ro*, "Robust Passivity Cascade Technique-Based Control Using RBFN Approximators for the Stabilization of a Cart Inverted Pendulum", Mathematics, Vol.9, No.11, 1229, May.27.2021.[Top 8% Journal]

10. Ali Asghar Memon, Syed Sabir Hussain Bukhari*, and Jong-Suk Ro*, "Experimental Determination of Equivalent Iron Loss Resistance for Prediction of Iron Losses in a Switched Reluctance Machine", IEEE Transactions on Magnetics, (Online Published).

9. Irfan Sami, Shafaat Ullah, Nasim Ullah, and Jong-Suk Ro*, "Sensorless fractional order composite sliding mode control design for wind generation system", ISA Transactions, (Online Published).[Top 12% Journal]

8. Soheil Yousefnejad, Hossein Heydari, Kan Akatsu, and Jong-Suk Ro*, "Analysis and Design of Novel Structured High Torque Density Magnetic-Geared Permanent Magnet Machine", IEEE Access, Vol.9, pp.64574-64586, Apr.28.2021.[Top 22% Journal]

7. Muhammad Bilal, Junaid Ikram, Adnan Fida, Syed Sabir Hussain Bukhari, Nadeem Haider, and Jong-Suk Ro*, "Performance Improvement of Dual Stator Axial Flux Spoke Type Permanent Magnet Vernier Machine", IEEE Access, Vol.9, pp.64179-64188, Apr.27.2021.[Top 22% Journal]

6. Muhammad Yousuf, Faisal Khan, Junaid Ikram, Rabiah Badar, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Reduction of Torque Ripples in Multi-Stack Slotless Axial Flux Machine by Using Right Angled Trapezoidal Permanent Magnet", IEEE Access, Vol.9, pp.22760-22773, Feb.02.2021.[Top 22% Journal]

5. Syed Sabir Hussain Bukhari, Ghulam Jawad Sirewal, Muhammad Ayub, and Jong-Suk Ro*, "A New Small-Scale Self-Excited Wound Rotor Synchronous Motor Topology", IEEE Transactions on Magnetics, Vol.57, pp.1-5, Feb.2021.

4. Hamza Ahmad, and Jong-Suk Ro*, "Analysis and Design Optimization of V-Shaped Permanent Magnet Vernier Motor for Torque Density Improvement", IEEE Access, Vol.9, pp.13542-13552, Jan.18.2021.[Top 22% Journal]

3. Syed Sabir Hussain Bukhari, Hamza Ahmad, Ghulam Jawad Sirewal, and Jong-Suk Ro*, "Simplified Brushless Wound Field Synchronous Machine Topology Based on a Three-phase Rectifier", IEEE Access, Vol.9, pp.8637-8648, Jan.14.2021.[Top 22% Journal]

2. Wasiq Ullah, Faisal Khan, Erwan Sulaiman, Irfan Sami, and Jong-Suk Ro*, "Analytical Sub-Domain Model for Magnetic Field Computation in Segmented Permanent Magnet Switched Flux Consequent Pole Machine", IEEE Access,Vol.9,pp.3774-3783,Jan.07.2021.[Top 22% Journal]

1. Tae-Hoon Kwon, and Jong-Suk Ro*, "Analysis and Optimal Design of a Novel Actuator System for a Camera Module", IEEE Access, Vol.9, pp.3441-3450, Jan.07.2021.[Top 22% Journal]

[2020]

26. Mirza Aakif Baig, Junaid Ikram, Adnan Iftikhar, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Minimization of Cogging Torque in Axial Field Flux Switching Machine Using Arc Shaped Triangular Magnets", IEEE Access, Vol.8, pp.227193-227201, Dec.15.2020.[Top 14% Journal]

25. Saddaqat Ali, Jahangeer Badar Soomro, Mahnoor Mughal, Faheem Akhter Chachar, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Power Quality Improvement in HVDC MMC with Modified Nearest Level Control in Real-Time HIL Based Setup", IEEE Access, Vol.8, pp.221712-221719, Dec.10.2020.[Top 14% Journal]

24. Syed Sabir Hussain Bukhari, Ghulam Jawad Sirewal, Sadjad Madanzadeh, and Jong-Suk Ro*, "Cost-Effective Single-Inverter-Controlled Brushless Technique for Wound Rotor Synchronous Machines", IEEE Access, Vol.8, pp.204804-204815, Nov.10.2020.[Top 14% Journal]

23. ByungOh Tak, and Jong-Suk Ro*, "Analysis and design of an axial flux permanent magnet motor for in-wheel system using a novel analytical method combined with a numerical method", IEEE Access, Vol.8, pp.203994-204011, Nov.09.2020.[Top 14% Journal]

22. Sadjad Madanzadeh, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Multifunctional Grid-Connected Voltage Source Inverter to Drive Induction Motor Operating with High-Inertia Load", IEEE Access, Vol.8, pp.196765-196774, Oct.29.2020.[Top 14% Journal]

21. Malik Muhammad Zaid, and Jong-Suk Ro*, "Optimal Design of a Cascaded Rectangular-Type and Circle-Type Multilevel Inverter with a New Switching Technique", IET Power Electronics, Vol.13, pp.2831-2846, Oct.15.2020.

20. Irfan Sami, Shafaat Ullah, Abdul Basit, Nasim Ullah, and Jong-Suk Ro*, "Integral Super Twisting Sliding Mode Based Sensorless Predictive Torque Control of Induction Motor", IEEE Access, Vol.8, pp.186740-186755, Oct.06.2020.[Top 14% Journal]

19. Irfan Sami, Nasim Ullah, S.M. Muyeen, Kuaanan Techato, Md. Shahariar Chowdhury, and Jong-Suk Ro*, "Control Methods for Standalone and Grid Connected Micro-Hydro Power Plants with Synthetic Inertia Frequency Support: A Comprehensive Review", IEEE Access, Vol. 8, pp.176313-176329, Sep.24.2020.[Top 14% Journal]

18. Rashid Khan, Laiq Khan, Shafaat Ullah, Irfan Sami, and Jong-Suk Ro*, “Backstepping Based Super-Twisting Sliding Mode MPPT Control with Differential Flatness Oriented Observer Design for Photovoltaic System”, Electronics, Vol.9, No.9, 1543, Sep.21.2020.

17. Khalid Salman Khan, Sahibzada Muhammad Ali, Zahid Ullah, Irfan Sami, Bilal Khan, Chaudhry Arshad Mehmood, Umar Farid, Jawad Saleem, and Jong-Suk Ro*, “Statistical Energy Information and Analysis of Pakistan Economic Corridor Based on Strengths, Availabilities, and Future Roadmap”, IEEE Access, Vol.8, No.1, pp.169701-169739, Sep.14.2020.[Top 14% Journal]

16. Muhammad Zafran, Laiq Khan, Shafaat Ullah, Irfan Sami, and Jong-Suk Ro*, "Finite-Time Fast Dynamic Terminal Sliding Mode Maximum Power Point Tracking Control Paradigm for Permanent Magnet Synchronous Generator -Based Wind Energy Conversion System", Applied Sciences, Vol.10, No.18, 6361, Sep.12.2020.

15. Nikita Gabdullin, Hamza Ahmad, and Jong-Suk Ro*, "Next Generation Autofocus and Optical Image Stabilization System for Camera Modules using Magnetic Shape Memory Actuators", IEEE Access, Vol.8, pp.160177-160187, Aug.31.2020.[Top 14% Journal]

14. Saddaqat Ali, Jahangir Badar, Faheem Akhtar Chachar, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Real-Time Controller Design Test Bench for High-Voltage Direct Current Modular Multilevel Converters", Applied Sciences, Vol.10, No.17, 6004, Aug.29.2020.

13. Syed Sabir Hussain Bukhari, Ghulam Jawad Sirewal, Faheem Akhtar Chachar, and Jong-Suk Ro*, "Brushless Field Excitation Scheme for Wound Field Synchronous Machines", Applied Sciences, Vol.10, No.17, 5866, Aug.25.2020.

12. Abdul Waheed, and Jong-Suk Ro*, "Analytical Modeling for Optimal Rotor Shape to Design Highly Efficient Line-Start Permanent Magnet Synchronous Motor", IEEE Access, Vol.9, No.1, pp.145672-145686, Aug.06.2020.[Top 14% Journal]

11. Nikita Gabdullin, and Jong-Suk Ro*, "Novel Piezoelectric Emergency Opening Sub-system to Improve the Safety and Reliability of Zero-Holding-Energy Permanent Magnet Magnetic Contactors", IEEE Access, Vol.8, No.1, pp.145672-145686, Jul.24.2020. [Top 14% Journal]

10. Hamid Ali Khan, Faisal Khan, Naseer Ahmad, and Jong-Suk Ro*, "Analysis and Design of Novel High Speed Permanent Magnet Machine Considering Magnet Eddy Current Loss", IEEE Access, Vol.8, pp.135675-135685, Jul.20.2020.[Top 14% Journal]

9. Ali Asghar Memon, Muhammad Mujtaba, Shaikh, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Look-up Data Tables-Based Modeling of Switched Reluctance Machine and Experimental Validation of the Static Torque with Statistical Analysis", Journal of Magnetics, Vol.25, No.12, pp.233-244, Jun.25.2020.

8. Dong-Kyu Lee, and Jong-Suk Ro*, "Analysis and Design of a High-Performance Traction Motor for Heavy-Duty Vehicles", Energies, Vol.13, No.12, 3150, Jun.17.2020.

7. Nikita Gabdullin, and Jong-Suk Ro*, "Energy-Efficient Eco-Friendly Zero-Holding-Energy Magnetic Contactor for Industrial and Vehicular Applications", IEEE Transactions on Vehicular Technology, Vol.69, Issue.12, pp.5000-5011, May.19.2020.[Top 11% Journal]

6. Syed Sabir Hussain Bukhari, Ghulam Jawad Sirewal, Faheem Akhtar Chachar, and Jong-Suk Ro*, “Dual-Inverter-Controlled Brushless Operation of Wound Rotor Synchronous Machines Based on an Open-Winding Pattern", Energies, Vol.13, No.9, 2205, May.02.2020.

5. Irfan Sami, Shafaat Ullah, Zahoor Al, Nasim Ullah, and Jong-Suk Ro*, “A Super Twisting Fractional Order Terminal Sliding Mode Control for DFIG-Based Wind Energy Conversion System", Energies, Vol.13, No.9, 2158, May.01.2020.

4. Sadjad Madanzadeh, Ali Abedin, Ahmad Radan, and Jong-Suk Ro*, “Application of Quadratic Linearization State Feedback Control with Hysteresis Reference Reformer to Improve the Dynamic Response of Interior Permanent Magnet Synchronous Motors”, ISA Transactions, Vol.99, pp167-190, Apri.01.2020.[Top 8% Journal]

3. Nikita Gabdullin, and Jong-Suk Ro*, "Analysis of Nonlinear Dynamics of Permanent Magnet Magnetic Contactor via Novel Computationally Efficient Analytical Method considering Stray and Leakage Fluxes", IEEE Access, Vol.8, No.1, pp.57273-57282, Mar.23.2020.[Top 14% Journal]

2. Min-Seob Sim, and Jong-Suk Ro*, "Semi-Analytical Modeling and Analysis of Halbach Array", Energies, Vol.13, No.5, 1252, Mar.08.2020.

1. Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "A Single-Phase Line-Interactive UPS System for Transformer-Coupled Loading Conditions", IEEE Access, Vol.8, No.1, pp.23143-23153, Jan.30.2020.[Top 14% Journal]

[2019]

10. Yoon-Sun Lee, Kyoung-Tak Kim, Joung-Hu Park, Seung-Jae Lee, Tae-Kyung Chung, and Jong-Suk Ro*, "Characteristic Analysis and Design of Novel High-Frequency Shell-Type Coaxial Transformer", IET Electric Power Applications, Vol.13, No.12, pp. 2027-2034,Dec.05.2019.

9. Sahib Khan, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Design and Analysis of a 4-kW Two-stack Coreless Axial Flux Permanent Magnet Synchronous Machine for Low-speed Applications", IEEE Access, Vol.7, No.1, pp.173848-173854, Dec.02.2019.[Top 14% Journal]

8. Faheem A. Chachar, S. S. H. Bukhari, F. M. Mangi, D. Ewen Macpherson, Gareth P. Harrison, Waqquas Bukhsh, and Jong-Suk Ro*, "Hierarchical Control Implementation for Meshed AC/Multi-Terminal DC Grids With Offshore Windfarms Integration", IEEE Access, Vol.7, No.1, pp.142233-142245, Sep.30.2019. [Top 14% Journal]

7. Min-Seob Sim, and Jong-Suk Ro*, "Analysis of an Eddy Current Brake for an Actuator of a High-Voltage Direct Current Circuit Breaker", IET Electric Power Applications, Vol.13, No.9, pp. 1387-1391, Sep.16.2019.

6. Han-Kyeol Yeo, and Jong-Suk Ro*, "Novel Analytical Method for Overhang Effects in Surface-Mounted Permanent-Magnet Machines", IEEE Access, Vol.7, No.1, pp.148453-148461, Sep.06.2019. [Top 14% Journal]

5. Malik Muhammad Zaid, and Jong-Suk Ro*, "Switch Ladder Modified H-Bridge Multilevel Inverter with Novel Pulse Width Modulation Technique", IEEE Access, Vol.7, No.1, pp.102073-102086, Jul.24.2019. [Top 14% Journal]

4. Dong-Kuk Lim, and Jong-Suk Ro*, "Analysis and Design of a Delta-Type Interior Permanent Magnet Synchronous Generator by Using an Analytic Method", IEEE Access, Vol.7, No.1, pp.85139-85145, Jun.24.2019. [Top 14% Journal]

3. Jae-Gil Lee, Han-Kyeol Yeo, Hyun-Kyo Jung, Tae-Keun Kim, and Jong-Suk Ro*, "Electromagnetic and Thermal Analysis and Design of a Novel Structured Surface-Mounted Permanent Magnet Motor with High-Power-Density", IET Electric Power Applications, Vol.13, No.4, pp.472-478, Apri.15.2019.

2. Nikita Gabdullin, and Jong-Suk Ro*, "Novel Non-linear Transient Path Energy Method for the Analytical Analysis of the Non-periodic and Non-linear Dynamics of Electrical Machines in the Time Domain", IEEE Access, Vol.7, No.1, pp.37833-37854, May.18.2019.[Top 14% Journal]

1. Seung-Jae Lee, Hyun-Kyo Jung, Tae-Kyung Chung, Yoon-Sun Lee, and Jong-Suk Ro*, "Ratio Error Reduction of a Current Transformer Using Multiple Winding Technique", Journal of Electrical Engineering & Technology, Vol.14, No.2, pp.645-651, Mar.01.2019.

[Mar.01.2019] Dr. Ro promoted as a Associate Professor

[2018]

4. Hyuk-Sung Kwon, Jong-Suk Ro*, and Hyun-Kyo Jung, “A Novel Social Insect Optimization Algorithm for the Optimal Design of an Interior Permanent Magnet Synchronous Machine”, IEEE Transactions on Magnetics, Vol. 54, NO.12, pp.1-6, Dec.01.2018.

3. Seok-Won Jung, Jong-Suk Ro*, and Hyun-Kyo Jung, “A Hybrid Algorithm Using Shape and Topology Optimization for the Design of Electric Machines”, IEEE Transactions on Magnetics, Vol.54, No.3, pp.1-4, Mar.01.2018.

2. Hyeon-Jeong Park, Han-Kyeol Yeo, Sang-Yong Jung, Tae-Kyung Chung, Jong-Suk Ro*, and Hyun-Kyo Jung, “A Robust Multimodal Optimization Algorithm based on a Sub-division Surrogate Model and an Improved Sampling Method”, IEEE Transactions on Magnetics, Vol.54, No.3, pp.1-4, Mar.01.2018.

1. Jae-Woo Kang, Hyeon-Jeong Park, Jong-Suk Ro*, and Hyun-Kyo Jung, “A Strategy-Selecting Hybrid Optimization Algorithm to Overcome the Problems of the No Free Lunch Theorem”, IEEE Transactions on Magnetics, Vol.54, No.3, pp.1-4, Mar.01.2018.

[2017]

3. Dong-Kuk Lim, Sang-Yong Jung, Hyun-Kyo Jung, and Jong-Suk Ro*, “Analytical Prediction of Cogging Torque for Interior Permanent Magnet Synchronous Motors”, International Journal of Applied Electromagnetics and Mechanics, Vol.55, No.4, pp.625-635, Nov.22.2017.

2. Han-Kyeol Yeo, Hyeon-Jeong Park, Jung-Moo Seo, Sang-Yong Jung, Jong-Suk Ro*, and Hyun-Kyo Jung, “Electromagnetic and Thermal Analysis of a Surface-Mounted Permanent-Magnet Motor with Overhang Structure”, IEEE Transactions on Magnetics, Vol.53, No.6, pp.1-4, Jun.01.2017.

1. Dong-Kuk Lim, Sang-Yong Jung, Jong-Suk Ro*, and Hyun-Kyo Jung, “An Optimal Design Strategy for a Thomson Coil Actuator”, Journal of Electrical Engineering & Technology, Vol.12, No.1, pp.182-188, Jan.01.2017.

[2016]

2. Hyeon-Jeong Park, Hyun-Kyo Jung, and Jong-Suk Ro*, “Analysis and Design of Diverse Electromagnet Type Actuators for Molded Case Circuit Breaker”, IET Electric Power Applications, Vol.10, No.9, pp.849-857, Nov.01.2016.

1. Dong-Kuk Lim, Yong-Sun Cho, Jong-Suk Ro, Sang-Yong Jung, and Hyun-Kyo Jung, “Optimal Design of an Axial Flux Permanent Magnet Synchronous Motor for the Electric Bicycle”, IEEE Transactions on Magnetics, Vol.52, No.3, pp.1-4, Mar.01.2016.

[Mar.01.2016] Dr. Ro joined Chung-Ang University as a Professor and established EEA Lab

[2015]

6. Dong-Kuk Lim, Kyung-Pyo Yi, Sang-Yong Jung, Hyun-Kyo Jung, and Jong-Suk Ro*, “Optimal Design of an Interior Permanent Magnet Synchronous Motor by Using a New Surrogate Assisted Multi-Objective Optimization”, IEEE Transactions on Magnetics, Vol.51, No.11, pp.1-4, Nov.01.2015.

5. Seo Jung-Moo, Jong-Suk Ro*, Se-Hyun Rhyu, Jung In-Soung, and Hyun-Kyo Jung, “Novel Hybrid Radial and Axial Flux Permanent-Magnet Machine Using Integrated Windings for High-Power Density”, IEEE Transactions on Magnetics, Vol.51, No.3, pp.1-4, Mar.01.2015.

4. Han-Kyeol Yeo, Dong-Kuk Lim, Dong-Kyun Woo, Jong-Suk Ro, and Hyun-Kyo Jung, “Magnetic Equivalent Circuit Model Considering Overhang Structure of a Surface-Mounted Permanent-Magnet Motor”, IEEE Transactions on Magnetics, Vol.51, No.3, pp.1-4, Mar.01.2015.

3. Dong-Kuk Lim, Dong-Kyun Woo, Han-Kyeol Yeo, Sang-Yong Jung, Jong-Suk Ro*, and Hyun-Kyo Jung, “A Novel Surrogate-Assisted Multi-Objective Optimization Algorithm for an Electromagnetic Machine Design”, IEEE Transactions on Magnetics, Vol.51, No.3, pp.1-4, Mar.01.2015.

2. Chung-Hee Yoo, Dong-Kuk Lim, Dong-Kyun Woo, Jong-Ho Choi, Jong-Suk Ro, and Hyun-Kyo Jung, “A New Multimodal Optimization Algorithm for the Design of In-Wheel Motors”, IEEE Transactions on Magnetics, Vol.51, No.3, pp.1-4, Mar.01.2015.

1. Jong-Suk Ro*, Hyeon-Jeong Park, and Hyun-Kyo Jung, “Characteristic Analysis and Design of a Novel Lorentz Force Driving Actuator for a Molded Case Circuit Breaker”, IET Electric Power Applications, Vol.9, No.1, pp.1-9, Jan.01.2015

[2014]

8. Han-Kyeol Yeo, Dong-Kyun Woo, Dong-Kuk Lim, Jong-Suk Ro*, and Hyun-Kyo Jung, “Analysis of a Surface-mounted Permanent Magnet Machine with Overhang Structure by using a Novel Equivalent Circuit Model”, Journal of Electrical Engineering & Technology, Vol.9, No.6, pp.742-748, Nov.01.2014.

7. Jong-Suk Ro*, Sang-Yong Jung, Cheol-Gyun Lee, and Hyun-Kyo Jung, “Survey of a Contact Model and Characteristic Analysis method for a Travelling Wave Ultrasonic Motor”, International Journal of Applied Electromagnetics and Mechanics, Vol.46, No.3, pp.437-453, Sep.29.2014.

6. Jung-Moo Seo, In-Soung Jung, Hyun-Kyo Jung, and Jong-Suk Ro*, “Analysis and Design of a Coreless Permanent-magnet Machine considering the Winding Shape by using a Lumped Equivalent Magnetic Circuit Model”, European Physical Journal-Applied Physics, Vol.66, No.2, pp.20902-20913, Jun.05.2014.

5. Dong-Kuk Lim, Kyung-Pyo Yi, Dong-Kyun Woo, Han-Kyeol Yeo, Jong-Suk Ro*, Cheol-Gyun Lee, and Hyun-Kyo Jung, “Analysis and Design of a Multi-Layered and Multi-Segmented Interior Permanent Magnet Motor by Using an Analytic Method”, IEEE Transactions on Magnetics, Vol.50, No.6, pp.1-8, Jun.01.2014.

4. Il-Woo Kim, Dong-Kyun Woo, Dong-Kuk Lim, Sang-Yong Jung, Cheol-Gyun Lee, Jong-Suk Ro*, and Hyun-Kyo Jung, “Minimization of a Cogging Torque for an Interior Permanent Magnet Synchronous Machine using a Novel Hybrid Optimization Algorithm”, Journal of Electrical Engineering & Technology, Vol.9, No.3, pp.859-865, May.01.2014.

3. Jung-Moo Seo, Jong-Suk Ro*, In-Soung Jung, and Hyun-Kyo Jung, “Analysis of Overhang Effect for a Surface-mounted Permanent Magnet Machine by using a Lumped Magnetic Circuit Model”, IEEE Transactions on Magnetics, Vol.50, No.5, pp.1-7, May.01.2014.

2. Seung-Ki Hong, Jong-Suk Ro*, and Hyun-Kyo Jung, “Optimal Design of a Novel Permanent Magnetic Actuator using Evolutionary Strategy Algorithm and Kriging Meta-Model”, Journal of Electrical Engineering & Technology, Vol.9, No.2, pp.417-477, Mar.01.2014.

1. Sang-Yub Lee, Jong-Suk Ro*, and Hyun-Kyo Jung, “Eddy Current Loss Analysis in the Rotor of Surface-Mounted Permanent Magnet Brushless Machine with Retainer”, International Journal of Applied Electromagnetics and Mechanics, Vol.44, No.1, pp.41-50, Jan.21.2014.

[2013]

12. Dong-Kuk Lim, Dong-Kyun Woo, Il-Woo Kim, Dong-Kyu Shin, Jong-Suk Ro*, Tae-Kyung Chung, and Hyun-Kyo Jung, “Characteristic Analysis and Design of a Thomson Coil Actuator using an Analytic Method and a Numerical Method”, IEEE Transactions on Magnetics, Vol.49, No.12, pp.5749-5755, Dec.01.2013.

11. Jong-Suk Ro*, Kyung-Pyo Yi, Tae-Kyung Chung, and Hyun-Kyo Jung, “Characteristic Analysis of a Traveling Wave Ultrasonic Motor using a Cylindrical Dynamic Contact Model”, Journal of Electrical Engineering & Technology, Vol.8, No.6, pp.1415-1423, Nov.01.2013.

10. Hyeon-Jeong Park, Jong-Suk Ro*, Tae-Kyung Chung, and Hyun-Kyo Jung, “Characteristics Analysis and Design of a Novel Magnetic Contactor for a 220V.85A”, IEEE Transactions on Magnetics, Vol.49, No.11, pp5498-5506, Nov.01.2013.

9. Dong-Kuk Lim, Dong-Kyun Woo, Il-Woo Kim, Jong-Suk Ro*, and Hyun-Kyo Jung, “Cogging Torque Minimization of a Dual Type Permanent Magnet Motor using a Novel Optimization Algorithm”, IEEE Transactions on Magnetics, Vol.49, No.9, pp.5106-5111, Sep.01.2013.

8. Dong-Kyun Woo, Dong-Kuk Lim, Han-Kyeol Yeo, Jong-Suk Ro*, and Hyun-Kyo Jung, “A 2D Finite Element Analysis for a Permanent Magnet Synchronous Motor taking an Overhang Effect into Consideration”, IEEE Transactions on Magnetics, Vol.49, No.8, pp.4894-4899, Aug.01.2013.

7. Jong-Suk Ro*, Kyung-Pyo Yi, Tae-Kyung Chung, and Hyun-Kyo Jung, “Characteristic Analysis and Shape Optimal Design of a Ring-type Traveling Wave Ultrasonic Motor”, European Physical Journal-Applied Physics, Vol.63, No.1, Jul.05.2013.

6. Kyung-Pyo Yi, Jong-Suk Ro, Sang-Yub Lee, Ji-Kwang Lee, Ki-Chul Seong, Kyeong-dal Choi, Hyun-Kyo Jung, and Song-Yop Hahn. “A Design Methodology for Toroid-Type SMES using Analytical and Finite Element Method, IEEE Transactions on Applied Superconductivity, Vol.23, No.3, pp.4900404-4900404, Jun.01.2013.

5. Dong-Jin Cho, Dong-Kyun Woo, Jong-Suk Ro*, Tae-Kyung Chung, and Hyun-Kyo Jung, “Novel Electromagnetic Actuator using a Permanent Magnet and an Inter-locking Mechanism for a Magnetic Switch”, IEEE Transactions on Magnetics, Vol.49, No.5, pp.2229-2232, May.07.2013.

4. Sang-Yub Lee, Dong-Kyun Woo, Jong-Suk Ro*, and Hyun-Kyo Jung, “Analysis of a Permanent Magnet Machine for a High Power Density taking Losses into Consideration”, IEEE Transactions on Magnetics, Vol.49, No.5, pp.1765-1768, May.07.2013.

3. Dong-Kyun Woo, Il-Woo Kim, Dong-Kuk Lim, Jong-Suk Ro*, and Hyun-Kyo Jung, “Cogging Torque Optimization of Axial Flux Permanent Magnet Motor”, IEEE Transactions on Magnetics, Vol.49, No.5, pp.2189-2192, May.07.2013.

2. Yong-Sun Cho, Jong-Suk Ro, Yong-Seek Chung, Chang-yul Cheon, and Hyun-Kyo Jung, “Investigation of Electromagnetic Field Coupling with Twisted Conducting Line by Expanded Chain Matrix”, Journal of Electrical Engineering & Technology, Vol.8, No.2, pp.364-370, Mar.01.2013.

1. Jong-Suk Ro*, Seung-Ki Hong, and Hyun-Kyo Jun, “Characteristic Analysis and Design of a Novel Permanent Magnetic Actuator for a Vacuum Circuit Breaker, IET Electric Power Applications, Vol.7, No.2, pp.87-96, Feb.01.2013.

[Feb.01.2012] Dr. Ro joined Seoul National University as a Post Doctoral Fellow

Below [Num.1 - Num.9] are Paper Achievements during Graduate Course of Prof. Ro (Published as "Jong-Seok Rho" before renaming)

9. Jung-Pil Lim, Jong-Seok Rho*, Kyung-Pyo Yi, Jung-Moo Seo, and Hyun-Kyo Jung, “Characteristic analysis of a traveling wave ultrasonic motor using an ellipsoidal static contact model”, Smart Materials and Structures, Vol.18, No.11, Nov.15.2009. (Ph.D Thesis of Dr. Ro)[Top 8% Journal]

8. Jong-Seok Rho*, Chang-Hwan Lee, and Hyun-Kyo Jung, “Characteristic analysis and design of a small size Rotary Ultrasonic Motor using the Cutting Method”, International Journal of Applied Electromagnetics and Mechanics, Vol.28, No.4, pp.469-500, Nov.18.2008.

7. Jong-Seok Rho*, Sang-Yeop Kwak, Tae-Kyung Chung, and Hyun-Kyo Jung, “Analysis of a nano positioning actuator using a numerical method combined with a analytic method”, International Journal of Applied Electromagnetics and Mechanics, Vol.28, No.3, pp.379-394, Sep.18.2008.

6. Jong-Seok Rho*, Chang-Hwan Lee, Tae-Kyung Chung, Chang-Hwan Im, and Hyun-Kyo Jung, “Analysis of a nanopositioning actuator using numerical and analytic methods”, Smart Materials and Structures, Vol.17, No.2, Apri.29.2008. [Top 8% Journal]

5. Jong-Seok Rho*, Chang-Hwan Lee, and Hyun-Kyo Jung, “Optimal design of ultrasonic motor using evolution strategy and finite element method”, International Journal of Applied Electromagnetics and Mechanics, Vol.25, No.1-4, pp.699-704, Jul.01.2007.

4. Jong-Seok Rho*, Kwang-il Oh, Hong-seok Kim, and Hyun-Kyo Jung, “Characteristic analysis and design of a B-14 rotary ultrasonic motor for a robot arm taking the contact mechanism into consideration”, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol.54, No.4, pp.715-728, Apri.01.2007. [Top 15% Journal]

3. Hyun-Woo Joo, Chang-Hwan Lee, Jong-Seok Rho, and Hyun-Kyo Jung, “Analysis of temperature rise for piezoelectric transformer using finite-element method”, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol.53, No.8, pp.1449-1457, Aug.01.2006. [Top 15% Journal]

2. Jong-Seok Rho*, Byung-Jai Kim, Chang-Hwan Lee, Hyun-Woo Joo, and Hyun-Kyo Jung, “Design and characteristic analysis of L1B4 ultrasonic motor considering contact mechanism”, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol.52, No.11, pp.2054-2064, Nov.01.2005. [Top 15% Journal]

1. Hyun-Woo Joo, Chang-Hwan Lee, Jong-Seok Rho, and Hyun-Kyo Jung, “Identification of material constants for piezoelectric transformers by three-dimensional, finite-element method and a design-sensitivity method”, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol.50, No.8, pp.965-971, Aug.01.2003. [Top 15% Journal]

Conference Papers

Since 2018

[2019]

7. Dong-Kyu Lee, and Jong-Suk Ro*, "Analysis and Design of Universally Applicable Traction Motor for Heavy-Duty Vehicles”, MT26 International Conference on Magnet Technology 2019, Vancouver, Canada, Sep. 22-27, 2019.

6. 탁병오, 노종석*, “전기자동차 인휠시스템용 전동기 특성 해석 및 설계”, 대한전기학회 하계학술대회, 고성, 한국, Jul.12.2019.

5. 이동규, 노종석*, “전기버스 및 트레일러용 고토크 견인전동기의 특성 해석 및 설계”, 대한전기학회 하계학술대회, 고성, 한국, Jul.12.2019.

4. 심민섭, 노종석*, “Design and Analysis of Synchronous Reluctance Motor”, 대한전자공학회 하계학술대회, 제주, 한국, Jun.28.2019.

3. 권태훈, 노종석* “카메라 손 떨림 보정용 VCM 액추에이터 특성 해석,” 대한전자공학회 하계학술대회, 제주, 한국, Jun.28.2019.

2. ByungOh Tak, and JongSuk Ro*, “Analysis and Design of an Axial-Flux Permanent Magnet Motor for an In-wheel System of an Electric Vehicle”, ITEC Asia-Pacific Conference, Jeju, South Korea, May.09.2019.

1. Dong-Kyu Lee, and Jong-Suk Ro*, “Design of Delta Type Interior Permanent Magnet Traction Motor for Electric Bus and Trailer”, ITEC Asia-Pacific Conference, Jeju, South Korea, May.09.2019.

[2018]

3. Min-Seob Sim, and Jong-Suk Ro*, “Analysis and Design of an Eddy Current Brake for an Actuator of High Voltage Direct Current Circuit Breaker”, IEEE Conference on Electromagnetic Field Computation(CEFC 2018), Hangzhou, China, Oct.31.2018.

2. Hyuk-Sung Kwon, Jong-Suk Ro, and Hyun-Kyo Jung, "Influence of a Rotor Eddy Current on Performance of a Vernier Permanent-Magnet Machine", 21st International Conference on Electrical Machines and Systems (ICEMS), Jeju, South Korea, Oct.07-10,2018.

1. Jae-Woo Kang, Jong-Suk Ro, Hyuk-Sung Kwon, and Hyun-Kyo Jung, "Design of an AC Magnetic Contactor with a Permanent Magnet", 21st International Conference on Electrical Machines and Systems (ICEMS), Jeju, South Korea, Oct.07-10,2018.

Patentsmore

Patent Application

18. 인-휠 다이렉트 드라이브 기능을 위한 새로운 고정자 구조를 가진 하이브리드 여자 자속 스위칭 기기(Outer Rotor Hybrid Excited Flux Switching Machine for in-wheel Direct Drive Application with novel stator structure), Application number(출원 번호)10-2020-0162500, KOR, 2020.11.27.

17. 의류 처리 장치(FABRIC TREATMENT APPARATUS), Application number(출원 번호)10-2020-0162493, KOR, 2020.11.27.

16. 머신러닝과 비콘을 이용한 실내 위치 파악 방법(Indoor positioning way using machine learning and beacons), Application number(출원 번호)10-2019-0170173, KOR, 2019.12.18.

15. 생체반응 정보의 강화학습을 통한 오류 검출 시스템 및 그 방법(Error Detection System through Enhanced Learning of Biometric Information), Application number(출원 번호)10-2019-0170170, KOR, 2019.12.18.

14. AR/VR 기반 사용자 친화적인 건물 내 에너지 및 물적자산 관리 시스템(AR/VR-based user-friendly in-building energy and physical asset management system), Application number(출원 번호)10-2019-0163579, KOR, 2019.12.10.

13. 증강현실을 통한 모바일 실내 네비게이션 시스템(Mobile Indoor Navigation System through Augmented Reality), Application number(출원 번호)10-2019-0163578, KOR, 2019.12.10.

12. 고압 직류송전 시스템 차단기용 브레이크 장치 및 이를 구비한 고압 직류송전 시스템 차단기(BRAKE APPARATUS FOR HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH BI-DIRECTIONAL BRAKING AND STOPPING FUNCTION BY LEAF SPRING AND HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH THE SAME), Application number(출원 번호)10-2019-0148774, KOR, 2019.11.19.

11. MSM 소자를 구비한 연료 분사장치(FUEL INJECTOR WITH MSM ELEMENT), Application number(출원 번호)10-2019-0145853, KOR, 2019.11.14.

10. 듀얼 MSM 소자를 구비한 휴대단말기 카메라용 액추에이터 및 이를 구비한 휴대단말기용 카메라모듈(ACTUATOR FOR MOBILE TERMINAL CAMERA WITH DUAL MSM ELEMENTS AND CAMERA MODULE FOR MOBILE TERMINAL WITH SAME), Application number(출원 번호)10-2019-0142595, KOR, 2019.11.08.

9. 판스프링에 의해 양방향 제동 및 정지 기능을 갖는 고압 직류송전 시스템 차단기용 톰슨코일 액추에이터 및 이를 구비한 고압 직류송전 시스템 차단기(THOMSON COIL ACTUATOR FOR HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH BI-DIRECTIONAL BRAKING AND STOPPING FUNCTION BY LEAF SPRING AND HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH THE SAME), Application number(출원 번호)10-2018-0157174, KOR, 2018.12.07.

8. 혈관 탐지 장치(DEVICE FOR DETECTION OF BLOOD VESSEL), Application number(출원 번호)10-2016-0066917, KOR, 2016.05.31.

7. Ultrasonic motor( 초음파 모터), Application number(출원 번호)10-006736.2, EP, 2010.06.29.

6. Ultrasonic motor and manufacturing method of the same (초음파 모터와 이의 제조 방법), Application number(출원 번호)12824661, US, 2010.06.28.

5. Optical image stabilizer for camera lens module (카메라 렌즈 모듈을 위한 광학적 이미지 안정 장치), Application number(출원 번호)12793332, US, 2010.06.03.

4. Optical image stabilizer for camera lens module( 카메라 렌즈 모듈을 위한 광학적 이미지 안정 장치), Application number(출원 번호)10-164072.0, EP, 2010.05.27.

3. 초음파 모터 및 그 제조 방법(ULTRASONIC MOTOR AND METHOD FOR MANUFACTURING THE ULTRASONIC MOTOR), Application number(출원 번호)10-2009-0058419, KOR, 2009.06.29.

2. 카메라 렌즈 모듈의 손떨림 보정 장치(OPTICAL IMAGE STABILIZER FOR CAMERA LENS MODULE), Application number(출원 번호)10-2009-0048842, KOR, 2009.06.03.

1. 나노 포지셔닝 액추에이터(Nano Positioning Actuator), Application number(출원 번호)10-2005-0049728, KOR, 2005.06.10.

Registered Patents

12. 듀얼 MSM 소자를 구비한 휴대단말기 카메라용 액추에이터 및 이를 구비한 휴대단말기용 카메라모듈(ACTUATOR FOR MOBILE TERMINAL CAMERA WITH DUAL MSM ELEMENTS AND CAMERA MODULE FOR MOBILE TERMINAL WITH SAME), Registration number(등록번호)10-2264881, KOR, 2020.06.08.

11. 자성 형상 기억 합금 액추에이터를 이용한 새로운 가솔린 엔진의 연료분사기(A Novel Gasoline Direct Injection (GDI) Engine Fuel Injector by using a Magnetic Shape Memory Alloy Actuator), Registration number(등록번호)10-2232823, KOR, 2021.03.22.

10. 고압 직류송전 시스템 차단기용 브레이크 장치 및 이를 구비한 고압 직류송전 시스템 차단기(BRAKE APPARATUS FOR HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH BI-DIRECTIONAL BRAKING AND STOPPING FUNCTION BY LEAF SPRING AND HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH THE SAME), Registration number(등록번호)10-2248199, KOR, 2020.04.28.

9. 판스프링에 의해 양방향 제동 및 정지 기능을 갖는 고압 직류송전 시스템 차단기용 톰슨코일 액추에이터 및 이를 구비한 고압 직류송전 시스템 차단기(THOMSON COIL ACTUATOR FOR HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH BI-DIRECTIONAL BRAKING AND STOPPING FUNCTION BY LEAF SPRING AND HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH THE SAME), Registration number(등록번호)1020988870000, KOR, 2020.04.02.

8. 혈관 탐지 장치(DEVICE FOR DETECTION OF BLOOD VESSEL), Registration number(등록번호)1018799340000, KOR, 2018.07.12.

7. Optical image stabilizer for camera lens module(카메라 렌즈 모듈을 위한 광학적 이미지 안정 장치), Registration number(등록번호)02259571, EP, 2018.03.07.

6. 초음파 모터 및 그 제조 방법(ULTRASONIC MOTOR AND METHOD FOR MANUFACTURING THE ULTRASONIC MOTOR), Registration number(등록번호)1016538260000, KOR, 2016.08.29.

5. 카메라 렌즈 모듈의 손떨림 보정 장치(OPTICAL IMAGE STABILIZER FOR CAMERA LENS MODULE), Registration number(등록번호)1015730730000, KOR, 2015.11.24.

4. Ultrasonic motor(초음파 모터), Registration number(등록번호)02270893, EP, 2015.08.05.

3. Optical image stabilizer for camera lens module (카메라 렌즈 모듈을 위한 광학적 이미지 안정 장치), Registration number(등록번호)08665339, US, 2014.03.04.

2. Ultrasonic motor and manufacturing method of the same(초음파 모터와 이의 제조 방법), Registration number(등록번호)08044554, US, 2011.10.25.

1. 나노 포지셔닝 액추에이터(Nano Positioning Actuator), Registration number(등록번호)1007101400000, KOR, 2007.04.16.

Projectsmore

Lecturemore

전체메뉴

MEMBER Electrical Energy Application Lab

Professor

Book

SCI(E) Indexed Papers

Conference Papers

Patent Application

Registered Patents

[In Progress]Graduate School of Intelligent Energy Industry Convergence (Human Resource Development Program for Energy)

[In Progress]Development of Assessment Technology for Impact of Electric Facility on the Fire

[In Progress]Research Subsidies for Ph.D. Candidates

[In Progress]Optimal Design of a Novel Induction Machine Operating at Unity Power Factor by using a Novel Optimization Algorithm (Korea Research Fellow Program)

[In Progress]Research on a Novel Piezoelectric Energy Harvester for a Sensor of an Electric Power System

[In Progress]Ph.D Researcher Support Project

[In Progress]Renewable Energy Digital Twin & Big Data (Advanced Track for Human Resource Development Program )

[In Progress]Human Resource Development Program for Industry Convergent Wearable Smart Device

Development of a Next Generation Camera Module by using a Novel Actuator (Grant for Commercialization)

Development of High Torque Traction Motor for Electric Bus and Electric Trailer

Development of a Next Generation Camera Module by using a Novel Actuator (Grant for Commercialization)

Excellent Young Researcher Award

Development of Open Source based Coupling Analysis Program (Human Resource Development Program)

Development of a Magnetic Contactor without Power Consumption to Maintain a Closed State

Development of Actuator System for HVDC Circuit-breaker to provide Safe & Controllability of HVDC Power System

X-Corps (Human Resource Development Program)

Research on a Next Generation Energy Conversion System

Under Graduate Course

Graduate Course

Invited Lecture