중앙대 전기에너지응용 연구실(교수 노종석) | Electric Energy Application Laboratory of Chung-Ang University (Prof. Ro) - MEMBER

저서

2. 최종필, 김중헌, 노종석, 손채봉, 안두성, 안희준, 이희영, 정현환 공역, "ANSI C 프로그래밍 8판 (PROGRAMMING IN ANSI C 8th Edition)", ISBN: 979-11-85294-31-5 93560, 학산미디어, January 2021.

1. Won Y. Yang, Wenwu Cao, Jaekwon Kim, Kyung W. Park, Ho-Hyun Park, Jingon Joung, Jong-Suk Ro, Han L. Lee, Cheol-Ho Hong, Taeho Im, "Applied Numerical Methods Using MATLAB", 2nd Ed. ISBN: 978-1-119-62671-8, New York, NY, USA: Wiley, March 2020.

SCI(E) Indexed Papers

• 전체 게재: 111편 (주/교신저자 102편)

• '19년03월 이후 게재: 67편 (주/교신저자 67편)(Q1 상위 25% 이내 46편)

• 학위과정 기간 게재: 9편 (주/교신저자 7편)(Q1 상위 25% 이내 6편)

• 논문 리스트 [교신저자(책임저자)는 저자명에 * 기호로 명시]

[2021]

29. Jong-Suk Ro*, "Symmetric and Asymmetric Configuration of Parallel-Switched d-typr Multilevel Inverter", IEEE Journal of Emerging and Selected Topics in Power Electronics, (Accepted).

28. Nouman Shafique, Safdar Raza, Hafiz Mudassir Munir, Syed Sabir Hussain Bukhari and Jong-Suk Ro*, "Islanding Detection Strategy for Wind Farm Based on Performance Analysis of Passive Indices Having Negligible NDZ", Applied sciences, Vol.11, No.21, 9989, Oct.26.2021.

27. S. Ali, J. Ikram , C. P. Devereux, S. S. H. Bukhari , S. A. Khan, N. Khan and Jong-Suk Ro*, "Reduction of Cogging Torque in AFPM Machine Using EllipticalTrapezoidal-Shaped Permanent Magnet”, Applied Computational Electromagnetics Society, Vol.36, No.8, Oct.21.2021.

26. Ijaz Ahmad, Junaid Ikram, Muhammad Yousuf, Rabiah Badar, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Performance Improvement of Multi-Rotor Axial Flux Vernier Permanent Magnet Machine by Permanent Magnet Shaping", IEEE Access, Vol.9, pp.143188-143197, Oct.18.2021.

25. Bilawal Rehman, Atiq ur Rehman, Waqar Ahmad Khan, Irfan Sami, and Jong-Suk Ro*, "Operation and Challenges of Multi-Infeed LCC–HVDC System: Commutation Failure, AC/DC Power Flow, and Voltage Stability", Applied sciences, Vol.11, No.18, 8637, Sep.17.2021.

24. Mohd Rizwan Khalid, Irfan A. Khan, Salman Hameed, M. Sye Jamil Asghar and Jung-Suk Ro*, "A Comprehensive Review on Structural Topologies, Power Levels, Energy Storage Systems, and Standards for Electric Vehicle Charging Stations and Their Impacts on Grid", IEEE Access, Vol.9, pp.128069-128094, Sep.13.2021.

23. Zahoor Ahmad, Adnan Hassan, Faisal Khan, Naseer Ahmad, Bakhtiar Khan and Jong-Suk Ro*, "Analysis and Design of a Novel Outer Mover Moving Magnet Linear Oscillating Actuator for a Refrigeration System", IEEE Access, Vol.9, pp.121240-121252, Aug.30.2021.

22. Jahangeer Badar, Faheem Akhter, Hafiz Mudassir Munir, Syed Sabir Hussain Bukhari and Jong-Suk Ro*, "Efficient Real-Time Controller Design Test Bench for Power Converter Applications", IEEE Access, Vol.9, pp.118880-118892, Aug.25.2021.

21. Mohammad Yaseen, Irfan Ali, Sardar Muhammad Hussain and Jong-Suk Ro*, "Subclasses of Uniform Univalent Functions Associated with Srivastava and Attiya Operator", Symmetry, Vol.13, 153, Aug.20.2021.

20. Jahangir Badar, Saddaqat Ali, Hafiz Mudassir Munir, Veer Bhan, Syed Sabir Hussain Bukhari and Jong‐Suk Ro*, "Reconfigurable Power Quality Analyzer Applied to Hardware-in-Loop Test Bench", Energies, Vol.14, 5134, Aug.19.2021.

19. Jahangeer Badar Soomro, F.Akhter, Saddaqat Ali, Syed Sabir Hussain Bukhari, Irfan Sami and Jong-Suk Ro*, “Modified Nearest Level Modulation for Full-Bridge Based HVDC MMC in Real-Time Hardware-in-Loop Setup”, IEEE Access, Vol.9, pp.114998-115005, Aug.18.2021.

18. Tehreem Nasir, Syed Sabir Hussain Bukhari, Safdar Raza, Hafiz Mudassir Munir, Muhammad Abrar, Hafiz Abd ul Muqeet, Kamran Liaquat Bhatti, Rooha Masroor and Jong-Suk Ro*, "Recent Challenges and Methodologies in Smart Grid Demand Side Management: State of the Art Literature Review", Mathematical Problems in Engineering, Aug.09.2021.

17. Syed Sabir Hussain Bukhari, Hamza Ahmad, Faheem Akhter Chachar, and Jong-Suk Ro*, "Brushless Field-Excitation Method for Wound-Rotor Synchronous Machines", International Transactions on Electrical Energy Systems, Aug.01.2021.

16. Syed Sabir Hussain Bukhari, Ali Asghar Memon, Sadjad Madanzadeh, Ghulam Jawad Sirewal, Jesús Doval-Gandoy and Jong-Suk Ro*, "Novel Single Inverter-Controlled Brushless Wound Field Synchronous Machine Topology", Mathematics, Vol.8, No.15, 1739, July.23.2021.

15. Hina Usman, Junaid Ikram, Khurram Saleem Alimgeer, Muhammad Yousuf, Syed Sabir Hussain Bukhari and Jong-Suk Ro*, "Analysis and Optimization of Axial Flux Permanent Magnet Machine for Cogging Torque Reduction", Mathematics, Vol.9, No.15, 1738, July.23.2021.

14. Syed Sabir Hussain Bukhari, Fareed Hussain Mangi, Irfan Sami, Qasim Ali and Jong-Suk Ro*, "High-Harmonic Injection-Based Brushless Wound Field Synchronous Machine Topology", Mathematics, Vol.9, No.15, 1738, July.22.2021.

13. Syed Sabir Hussain Bukhari, Qasim Ali, Jesús Doval-Gandoy and Jong-Suk Ro*, "High-Efficient Brushless Wound Rotor Synchronous Machine Topology Based on Sub-Harmonic Field-Excitation Technique", Energies, Vol.14, No.15, 4427, July.22.2021.

12. Arif Hussain, Arslan Ahmed, Hina Magsi, Jahangeer Badar Soomro, Syed Sabir Hussain Bukhari and Jong-Suk Ro*, "Adaptive Data Length Method for GPS Signal Acquisition in Weak to Strong Fading Conditions", Electronics, Vol.10, No.14, 1735, July,19.2021.

11. Shahbaz Amin, Sadjad Madanzadeh, Sahib Khan, Syed Sabir Hussain Bukhari, Faheem Akhtar, and Jong-Suk Ro*, "Effect of the magnet shape on the performance of coreless axial flux permanent magnet synchronous generator", Electrical Engineering, July.12.2021.

10. Reza Rahmani, Saleh Mobayen*, Afef Fekih, and Jong-Suk Ro*, "Robust Passivity Cascade Technique-Based Control Using RBFN Approximators for the Stabilization of a Cart Inverted Pendulum", Mathematics, Vol.9, No.11, 1229, May.27.2021.

9. Ali Asghar Memon, Syed Sabir Hussain Bukhari*, and Jong-Suk Ro*, "Experimental Determination of Equivalent Iron Loss Resistance for Prediction of Iron Losses in a Switched Reluctance Machine", IEEE Transactions on Magnetics, May.25.2021.

8. Malik Muhammad Zaid, Muhammad Umair Aslam, Muhammad Umair Aslam, Muhammad Sibtain, Saqib Hasnain, and Jong-Suk Ro*, "Analytical modeling-based optimal design of multilayered and multisegmented D-type interior permanent magnet synchronous motor", Electrical Energy System, Vol.31, May.02.2021.

7. Irfan Sami, Shafaat Ullah, Nasim Ullah, and Jong-Suk Ro*, "Sensorless fractional order composite sliding mode control design for wind generation system", ISA Transactions, Vol.11, pp.275-289, May.01.2021.

6. Soheil Yousefnejad, Hossein Heydari, Kan Akatsu, and Jong-Suk Ro*, "Analysis and Design of Novel Structured High Torque Density Magnetic-Geared Permanent Magnet Machine", IEEE Access, Vol.9, pp.64574-64586, Apr.28.2021.

5. Muhammad Bilal, Junaid Ikram, Adnan Fida, Syed Sabir Hussain Bukhari, Nadeem Haider, and Jong-Suk Ro*, "Performance Improvement of Dual Stator Axial Flux Spoke Type Permanent Magnet Vernier Machine", IEEE Access, Vol.9, pp.64179-64188, Apr.27.2021.

4. Muhammad Yousuf, Faisal Khan, Junaid Ikram, Rabiah Badar, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Reduction of Torque Ripples in Multi-Stack Slotless Axial Flux Machine by Using Right Angled Trapezoidal Permanent Magnet", IEEE Access, Vol.9, pp.22760-22773, Feb.02.2021.

3. Syed Sabir Hussain Bukhari, Ghulam Jawad Sirewal, Muhammad Ayub, and Jong-Suk Ro*, "A New Small-Scale Self-Excited Wound Rotor Synchronous Motor Topology", IEEE Transactions on Magnetics, Vol.57, pp.1-5, Feb.2021.

2. Hamza Ahmad, and Jong-Suk Ro*, "Analysis and Design Optimization of V-Shaped Permanent Magnet Vernier Motor for Torque Density Improvement", IEEE Access, Vol.9, pp.13542-13552, Jan.18.2021.

1. Syed Sabir Hussain Bukhari, Hamza Ahmad, Ghulam Jawad Sirewal, and Jong-Suk Ro*, "Simplified Brushless Wound Field Synchronous Machine Topology Based on a Three-phase Rectifier", IEEE Access, Vol.9, pp.8637-8648, Jan.14.2021.

[2020]

28. Mirza Aakif Baig, Junaid Ikram, Adnan Iftikhar, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Minimization of Cogging Torque in Axial Field Flux Switching Machine Using Arc Shaped Triangular Magnets", IEEE Access, Vol.8, pp.227193-227201, Dec.31.2020.

27. Tae-Hoon Kwon, and Jong-Suk Ro*, "Analysis and Optimal Design of a Novel Actuator System for a Camera Module", IEEE Access, Vol.9, pp.3441-3450, Dec.30.2021.

26. Wasiq Ullah, Faisal Khan, Erwan Sulaiman, Irfan Sami, and Jong-Suk Ro*, "Analytical Sub-Domain Model for Magnetic Field Computation in Segmented Permanent Magnet Switched Flux Consequent Pole Machine", IEEE Access,Vol.9,pp.3774-3783,Dec.29.2021.

25. Saddaqat Ali, Jahangeer Badar Soomro, Mahnoor Mughal, Faheem Akhter Chachar, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Power Quality Improvement in HVDC MMC with Modified Nearest Level Control in Real-Time HIL Based Setup", IEEE Access, Vol.8, pp.221712-221719, Dec.10.2020.

24. Syed Sabir Hussain Bukhari, Ghulam Jawad Sirewal, Sadjad Madanzadeh, and Jong-Suk Ro*, "Cost-Effective Single-Inverter-Controlled Brushless Technique for Wound Rotor Synchronous Machines", IEEE Access, Vol.8, pp.204804-204815, Nov.10.2020.

23. ByungOh Tak, and Jong-Suk Ro*, "Analysis and design of an axial flux permanent magnet motor for in-wheel system using a novel analytical method combined with a numerical method", IEEE Access, Vol.8, pp.203994-204011, Nov.09.2020.

22. Sadjad Madanzadeh, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Multifunctional Grid-Connected Voltage Source Inverter to Drive Induction Motor Operating with High-Inertia Load", IEEE Access, Vol.8, pp.196765-196774, Oct.29.2020.

21. Malik Muhammad Zaid, and Jong-Suk Ro*, "Optimal Design of a Cascaded Rectangular-Type and Circle-Type Multilevel Inverter with a New Switching Technique", IET Power Electronics, Vol.13, pp.2831-2846, Oct.15.2020.

20. Irfan Sami, Shafaat Ullah, Abdul Basit, Nasim Ullah, and Jong-Suk Ro*, "Integral Super Twisting Sliding Mode Based Sensorless Predictive Torque Control of Induction Motor", IEEE Access, Vol.8, pp.186740-186755, Oct.06.2020.

19. Irfan Sami, Nasim Ullah, S.M. Muyeen, Kuaanan Techato, Md. Shahariar Chowdhury, and Jong-Suk Ro*, "Control Methods for Standalone and Grid Connected Micro-Hydro Power Plants with Synthetic Inertia Frequency Support: A Comprehensive Review", IEEE Access, Vol. 8, pp.176313-176329, Sep.24.2020.

18. Rashid Khan, Laiq Khan, Shafaat Ullah, Irfan Sami, and Jong-Suk Ro*, “Backstepping Based Super-Twisting Sliding Mode MPPT Control with Differential Flatness Oriented Observer Design for Photovoltaic System”, Electronics, Vol.9, No.9, 1543, Sep.21.2020.

17. Khalid Salman Khan, Sahibzada Muhammad Ali, Zahid Ullah, Irfan Sami, Bilal Khan, Chaudhry Arshad Mehmood, Umar Farid, Jawad Saleem, and Jong-Suk Ro*, “Statistical Energy Information and Analysis of Pakistan Economic Corridor Based on Strengths, Availabilities, and Future Roadmap”, IEEE Access, Vol.8, No.1, pp.169701-169739, Sep.14.2020.

16. Muhammad Zafran, Laiq Khan, Shafaat Ullah, Irfan Sami, and Jong-Suk Ro*, "Finite-Time Fast Dynamic Terminal Sliding Mode Maximum Power Point Tracking Control Paradigm for Permanent Magnet Synchronous Generator -Based Wind Energy Conversion System", Applied Sciences, Vol. 10, No. 18, 6361, Sep.12.2020.

15. Nikita Gabdullin, Hamza Ahmad, and Jong-Suk Ro*, "Next Generation Autofocus and Optical Image Stabilization System for Camera Modules using Magnetic Shape Memory Actuators", IEEE Access, Vol.8, pp.160177-160187, Aug.31.2020.

14. Saddaqat Ali, Jahangir Badar, Faheem Akhtar Chachar, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Real-Time Controller Design Test Bench for High-Voltage Direct Current Modular Multilevel Converters", Applied Sciences, Vol.10, No.17, 6004, Aug.29.2020.

13. Syed Sabir Hussain Bukhari, Ghulam Jawad Sirewal, Faheem Akhtar Chachar, and Jong-Suk Ro*, "Brushless Field Excitation Scheme for Wound Field Synchronous Machines", Applied Sciences, Vol.10, No.17, 5866, Aug.25.2020.

12. Abdul Waheed, and Jong-Suk Ro*, "Analytical Modeling for Optimal Rotor Shape to Design Highly Efficient Line-Start Permanent Magnet Synchronous Motor", IEEE Access, Vol.9, No.1, pp.145672-145686, Aug.06.2020.

11. Nikita Gabdullin, and Jong-Suk Ro*, "Novel Piezoelectric Emergency Opening Sub-system to Improve the Safety and Reliability of Zero-Holding-Energy Permanent Magnet Magnetic Contactors", IEEE Access, Vol.8, No.1, pp.145672-145686, Jul.24.2020.

10. Hamid Ali Khan, Faisal Khan, Naseer Ahmad, and Jong-Suk Ro*, "Analysis and Design of Novel High Speed Permanent Magnet Machine Considering Magnet Eddy Current Loss", IEEE Access, Vol.8, pp.135675-135685, Jul.20.2020.

9. Ali Asghar Memon, Muhammad Mujtaba, Shaikh, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Look-up Data Tables-Based Modeling of Switched Reluctance Machine and Experimental Validation of the Static Torque with Statistical Analysis", Journal of Magnetics, Vol.25, No.12, pp.233-244, Jun.25.2020.

8. Dong-Kyu Lee, and Jong-Suk Ro*, "Analysis and Design of a High-Performance Traction Motor for Heavy-Duty Vehicles", Energies, Vol.13, No.12, 3150, Jun.17.2020.

7. Nikita Gabdullin, and Jong-Suk Ro*, "Energy-Efficient Eco-Friendly Zero-Holding-Energy Magnetic Contactor for Industrial and Vehicular Applications", IEEE Transactions on Vehicular Technology, Vol.69, Issue.12, pp.5000-5011, May.19.2020.

6. Syed Sabir Hussain Bukhari, Ghulam Jawad Sirewal, Faheem Akhtar Chachar, and Jong-Suk Ro*, “Dual-Inverter-Controlled Brushless Operation of Wound Rotor Synchronous Machines Based on an Open-Winding Pattern", Energies, Vol.13, No.9, 2205, May.02.2020.

5. Irfan Sami, Shafaat Ullah, Zahoor Al, Nasim Ullah, and Jong-Suk Ro*, “A Super Twisting Fractional Order Terminal Sliding Mode Control for DFIG-Based Wind Energy Conversion System", Energies, Vol.13, No.9, 2158, May.01.2020.

4. Sadjad Madanzadeh, Ali Abedin, Ahmad Radan, and Jong-Suk Ro*, “Application of Quadratic Linearization State Feedback Control with Hysteresis Reference Reformer to Improve the Dynamic Response of Interior Permanent Magnet Synchronous Motors”, ISA Transactions, Vol.99, pp167-190, Apri.01.2020.

3. Nikita Gabdullin, and Jong-Suk Ro*, "Analysis of Nonlinear Dynamics of Permanent Magnet Magnetic Contactor via Novel Computationally Efficient Analytical Method considering Stray and Leakage Fluxes", IEEE Access, Vol.8, No.1, pp.57273-57282, Mar.23.2020.

2. Min-Seob Sim, and Jong-Suk Ro*, "Semi-Analytical Modeling and Analysis of Halbach Array", Energies, Vol.13, No.5, 1252, Mar.08.2020.

1. Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "A Single-Phase Line-Interactive UPS System for Transformer-Coupled Loading Conditions", IEEE Access, Vol.8, No.1, pp.23143-23153, Jan.30.2020.

[2019]

10. Yoon-Sun Lee, Kyoung-Tak Kim, Joung-Hu Park, Seung-Jae Lee, Tae-Kyung Chung, and Jong-Suk Ro*, "Characteristic Analysis and Design of Novel High-Frequency Shell-Type Coaxial Transformer", IET Electric Power Applications, Vol.13, No.12, pp. 2027-2034,Dec.05.2019.

9. Sahib Khan, Syed Sabir Hussain Bukhari, and Jong-Suk Ro*, "Design and Analysis of a 4-kW Two-stack Coreless Axial Flux Permanent Magnet Synchronous Machine for Low-speed Applications", IEEE Access, Vol.7, No.1, pp.173848-173854, Dec.02.2019.

8. Faheem A. Chachar, S. S. H. Bukhari, F. M. Mangi, D. Ewen Macpherson, Gareth P. Harrison, Waqquas Bukhsh, and Jong-Suk Ro*, "Hierarchical Control Implementation for Meshed AC/Multi-Terminal DC Grids With Offshore Windfarms Integration", IEEE Access, Vol.7, No.1, pp.142233-142245, Sep.30.2019.

7. Min-Seob Sim, and Jong-Suk Ro*, "Analysis of an Eddy Current Brake for an Actuator of a High-Voltage Direct Current Circuit Breaker", IET Electric Power Applications, Vol.13, No.9, pp. 1387-1391, Sep.16.2019.

6. Han-Kyeol Yeo, and Jong-Suk Ro*, "Novel Analytical Method for Overhang Effects in Surface-Mounted Permanent-Magnet Machines", IEEE Access, Vol.7, No.1, pp.148453-148461, Sep.06.2019.

5. Malik Muhammad Zaid, and Jong-Suk Ro*, "Switch Ladder Modified H-Bridge Multilevel Inverter with Novel Pulse Width Modulation Technique", IEEE Access, Vol.7, No.1, pp.102073-102086, Jul.24.2019.

4. Dong-Kuk Lim, and Jong-Suk Ro*, "Analysis and Design of a Delta-Type Interior Permanent Magnet Synchronous Generator by Using an Analytic Method", IEEE Access, Vol.7, No.1, pp.85139-85145, Jun.24.2019.

3. Jae-Gil Lee, Han-Kyeol Yeo, Hyun-Kyo Jung, Tae-Keun Kim, and Jong-Suk Ro*, "Electromagnetic and Thermal Analysis and Design of a Novel Structured Surface-Mounted Permanent Magnet Motor with High-Power-Density", IET Electric Power Applications, Vol.13, No.4, pp.472-478, Apri.15.2019.

2. Nikita Gabdullin, and Jong-Suk Ro*, "Novel Non-linear Transient Path Energy Method for the Analytical Analysis of the Non-periodic and Non-linear Dynamics of Electrical Machines in the Time Domain", IEEE Access, Vol.7, No.1, pp.37833-37854, May.18.2019.

1. Seung-Jae Lee, Hyun-Kyo Jung, Tae-Kyung Chung, Yoon-Sun Lee, and Jong-Suk Ro*, "Ratio Error Reduction of a Current Transformer Using Multiple Winding Technique", Journal of Electrical Engineering & Technology, Vol.14, No.2, pp.645-651, Mar.01.2019.

[2019년03월] Dr. 노종석 부교수 승진

[2018]

4. Hyuk-Sung Kwon, Jong-Suk Ro*, and Hyun-Kyo Jung, “A Novel Social Insect Optimization Algorithm for the Optimal Design of an Interior Permanent Magnet Synchronous Machine”, IEEE Transactions on Magnetics, Vol. 54, NO.12, pp.1-6, Dec.01.2018.

3. Seok-Won Jung, Jong-Suk Ro*, and Hyun-Kyo Jung, “A Hybrid Algorithm Using Shape and Topology Optimization for the Design of Electric Machines”, IEEE Transactions on Magnetics, Vol.54, No.3, pp.1-4, Mar.01.2018.

2. Hyeon-Jeong Park, Han-Kyeol Yeo, Sang-Yong Jung, Tae-Kyung Chung, Jong-Suk Ro*, and Hyun-Kyo Jung, “A Robust Multimodal Optimization Algorithm based on a Sub-division Surrogate Model and an Improved Sampling Method”, IEEE Transactions on Magnetics, Vol.54, No.3, pp.1-4, Mar.01.2018.

1. Jae-Woo Kang, Hyeon-Jeong Park, Jong-Suk Ro*, and Hyun-Kyo Jung, “A Strategy-Selecting Hybrid Optimization Algorithm to Overcome the Problems of the No Free Lunch Theorem”, IEEE Transactions on Magnetics, Vol.54, No.3, pp.1-4, Mar.01.2018.

[2017]

3. Dong-Kuk Lim, Sang-Yong Jung, Hyun-Kyo Jung, and Jong-Suk Ro*, “Analytical Prediction of Cogging Torque for Interior Permanent Magnet Synchronous Motors”, International Journal of Applied Electromagnetics and Mechanics, Vol.55, No.4, pp.625-635, Nov.22.2017.

2. Han-Kyeol Yeo, Hyeon-Jeong Park, Jung-Moo Seo, Sang-Yong Jung, Jong-Suk Ro*, and Hyun-Kyo Jung, “Electromagnetic and Thermal Analysis of a Surface-Mounted Permanent-Magnet Motor with Overhang Structure”, IEEE Transactions on Magnetics, Vol.53, No.6, pp.1-4, June.01.2017.

1. Dong-Kuk Lim, Sang-Yong Jung, Jong-Suk Ro*, and Hyun-Kyo Jung, “An Optimal Design Strategy for a Thomson Coil Actuator”, Journal of Electrical Engineering & Technology, Vol.12, No.1, pp.182-188, Jan.01.2017.

[2016]

2. Hyeon-Jeong Park, Hyun-Kyo Jung, and Jong-Suk Ro*, “Analysis and Design of Diverse Electromagnet Type Actuators for Molded Case Circuit Breaker”, IET Electric Power Applications, Vol.10, No.9, pp.849-857, Nov.01.2016.

1. Dong-Kuk Lim, Yong-Sun Cho, Jong-Suk Ro, Sang-Yong Jung, and Hyun-Kyo Jung, “Optimal Design of an Axial Flux Permanent Magnet Synchronous Motor for the Electric Bicycle”, IEEE Transactions on Magnetics, Vol.52, No.3, pp.1-4, Mar.01.2016.

[2016년03월] Dr. 노종석 중앙대 교수 임용 및 EEA 연구실 설립

[2015]

6. Dong-Kuk Lim, Kyung-Pyo Yi, Sang-Yong Jung, Hyun-Kyo Jung, and Jong-Suk Ro*, “Optimal Design of an Interior Permanent Magnet Synchronous Motor by Using a New Surrogate Assisted Multi-Objective Optimization”, IEEE Transactions on Magnetics, Vol.51, No.11, pp.1-4, Nov.01.2015.

5. Seo Jung-Moo, Jong-Suk Ro*, Se-Hyun Rhyu, Jung In-Soung, and Hyun-Kyo Jung, “Novel Hybrid Radial and Axial Flux Permanent-Magnet Machine Using Integrated Windings for High-Power Density”, IEEE Transactions on Magnetics, Vol.51, No.3, pp.1-4, Mar.01.2015.

4. Han-Kyeol Yeo, Dong-Kuk Lim, Dong-Kyun Woo, Jong-Suk Ro, and Hyun-Kyo Jung, “Magnetic Equivalent Circuit Model Considering Overhang Structure of a Surface-Mounted Permanent-Magnet Motor”, IEEE Transactions on Magnetics, Vol.51, No.3, pp.1-4, Mar.01.2015.

3. Dong-Kuk Lim, Dong-Kyun Woo, Han-Kyeol Yeo, Sang-Yong Jung, Jong-Suk Ro*, and Hyun-Kyo Jung, “A Novel Surrogate-Assisted Multi-Objective Optimization Algorithm for an Electromagnetic Machine Design”, IEEE Transactions on Magnetics, Vol.51, No.3, pp.1-4, Mar.01.2015.

2. Chung-Hee Yoo, Dong-Kuk Lim, Dong-Kyun Woo, Jong-Ho Choi, Jong-Suk Ro, and Hyun-Kyo Jung, “A New Multimodal Optimization Algorithm for the Design of In-Wheel Motors”, IEEE Transactions on Magnetics, Vol.51, No.3, pp.1-4, Mar.01.2015.

1. Jong-Suk Ro*, Hyeon-Jeong Park, and Hyun-Kyo Jung, “Characteristic Analysis and Design of a Novel Lorentz Force Driving Actuator for a Molded Case Circuit Breaker”, IET Electric Power Applications, Vol.9, No.1, pp.1-9, Jan.01.2015.

[2014]

8. Han-Kyeol Yeo, Dong-Kyun Woo, Dong-Kuk Lim, Jong-Suk Ro*, and Hyun-Kyo Jung, “Analysis of a Surface-mounted Permanent Magnet Machine with Overhang Structure by using a Novel Equivalent Circuit Model”, Journal of Electrical Engineering & Technology, Vol.9, No.6, pp.742-748, Nov.01.2014.

7. Jong-Suk Ro*, Sang-Yong Jung, Cheol-Gyun Lee, and Hyun-Kyo Jung, “Survey of a Contact Model and Characteristic Analysis method for a Travelling Wave Ultrasonic Motor”, International Journal of Applied Electromagnetics and Mechanics, Vol.46, No.3, pp.437-453, Sep.29.2014.

6. Jung-Moo Seo, In-Soung Jung, Hyun-Kyo Jung, and Jong-Suk Ro*, “Analysis and Design of a Coreless Permanent-magnet Machine considering the Winding Shape by using a Lumped Equivalent Magnetic Circuit Model”, European Physical Journal-Applied Physics, Vol.66, No.2, pp.20902-20913, June.05.2014.

5. Dong-Kuk Lim, Kyung-Pyo Yi, Dong-Kyun Woo, Han-Kyeol Yeo, Jong-Suk Ro*, Cheol-Gyun Lee, and Hyun-Kyo Jung, “Analysis and Design of a Multi-Layered and Multi-Segmented Interior Permanent Magnet Motor by Using an Analytic Method”, IEEE Transactions on Magnetics, Vol.50, No.6, pp.1-8, June.01.2014.

4. Il-Woo Kim, Dong-Kyun Woo, Dong-Kuk Lim, Sang-Yong Jung, Cheol-Gyun Lee, Jong-Suk Ro*, and Hyun-Kyo Jung, “Minimization of a Cogging Torque for an Interior Permanent Magnet Synchronous Machine using a Novel Hybrid Optimization Algorithm”, Journal of Electrical Engineering & Technology, Vol.9, No.3, pp.859-865, May.01.2014.

3. Jung-Moo Seo, Jong-Suk Ro*, In-Soung Jung, and Hyun-Kyo Jung, “Analysis of Overhang Effect for a Surface-mounted Permanent Magnet Machine by using a Lumped Magnetic Circuit Model”, IEEE Transactions on Magnetics, Vol.50, No.5, pp.1-7, May.01.2014.

2. Seung-Ki Hong, Jong-Suk Ro*, and Hyun-Kyo Jung, “Optimal Design of a Novel Permanent Magnetic Actuator using Evolutionary Strategy Algorithm and Kriging Meta-Model”, Journal of Electrical Engineering & Technology, Vol.9, No.2, pp.417-477, Mar.01.2014.

1. Sang-Yub Lee, Jong-Suk Ro*, and Hyun-Kyo Jung, “Eddy Current Loss Analysis in the Rotor of Surface-Mounted Permanent Magnet Brushless Machine with Retainer”, International Journal of Applied Electromagnetics and Mechanics, Vol.44, No.1, pp.41-50, Jan.21.2014.

[2013]

12. Dong-Kuk Lim, Dong-Kyun Woo, Il-Woo Kim, Dong-Kyu Shin, Jong-Suk Ro*, Tae-Kyung Chung, and Hyun-Kyo Jung, “Characteristic Analysis and Design of a Thomson Coil Actuator using an Analytic Method and a Numerical Method”, IEEE Transactions on Magnetics, Vol.49, No.12, pp.5749-5755, Dec.01.2013.

11. Jong-Suk Ro*, Kyung-Pyo Yi, Tae-Kyung Chung, and Hyun-Kyo Jung, “Characteristic Analysis of a Traveling Wave Ultrasonic Motor using a Cylindrical Dynamic Contact Model”, Journal of Electrical Engineering & Technology, Vol.8, No.6, pp.1415-1423, Nov.01.2013.

10. Hyeon-Jeong Park, Jong-Suk Ro*, Tae-Kyung Chung, and Hyun-Kyo Jung, “Characteristics Analysis and Design of a Novel Magnetic Contactor for a 220V.85A”, IEEE Transactions on Magnetics, Vol.49, No.11, pp5498-5506, Nov.01.2013.

9. Dong-Kuk Lim, Dong-Kyun Woo, Il-Woo Kim, Jong-Suk Ro*, and Hyun-Kyo Jung, “Cogging Torque Minimization of a Dual Type Permanent Magnet Motor using a Novel Optimization Algorithm”, IEEE Transactions on Magnetics, Vol.49, No.9, pp.5106-5111, Sep.01.2013.

8. Dong-Kyun Woo, Dong-Kuk Lim, Han-Kyeol Yeo, Jong-Suk Ro*, and Hyun-Kyo Jung, “A 2D Finite Element Analysis for a Permanent Magnet Synchronous Motor taking an Overhang Effect into Consideration”, IEEE Transactions on Magnetics, Vol.49, No.8, pp.4894-4899, Aug.01.2013.

7. Jong-Suk Ro*, Kyung-Pyo Yi, Tae-Kyung Chung, and Hyun-Kyo Jung, “Characteristic Analysis and Shape Optimal Design of a Ring-type Traveling Wave Ultrasonic Motor”, European Physical Journal-Applied Physics, Vol.63, No.1, July.05.2013.

6. Kyung-Pyo Yi, Jong-Suk Ro, Sang-Yub Lee, Ji-Kwang Lee, Ki-Chul Seong, Kyeong-dal Choi, Hyun-Kyo Jung, and Song-Yop Hahn. “A Design Methodology for Toroid-Type SMES using Analytical and Finite Element Method, IEEE Transactions on Applied Superconductivity, Vol.23, No.3, pp.4900404-4900404, June.01.2013.

5. Dong-Jin Cho, Dong-Kyun Woo, Jong-Suk Ro*, Tae-Kyung Chung, and Hyun-Kyo Jung, “Novel Electromagnetic Actuator using a Permanent Magnet and an Inter-locking Mechanism for a Magnetic Switch”, IEEE Transactions on Magnetics, Vol.49, No.5, pp.2229-2232, May.07.2013.

4. Sang-Yub Lee, Dong-Kyun Woo, Jong-Suk Ro*, and Hyun-Kyo Jung, “Analysis of a Permanent Magnet Machine for a High Power Density taking Losses into Consideration”, IEEE Transactions on Magnetics, Vol.49, No.5, pp.1765-1768, May.07.2013.

3. Dong-Kyun Woo, Il-Woo Kim, Dong-Kuk Lim, Jong-Suk Ro*, and Hyun-Kyo Jung, “Cogging Torque Optimization of Axial Flux Permanent Magnet Motor”, IEEE Transactions on Magnetics, Vol.49, No.5, pp.2189-2192, May.07.2013.

2. Yong-Sun Cho, Jong-Suk Ro, Yong-Seek Chung, Chang-yul Cheon, and Hyun-Kyo Jung, “Investigation of Electromagnetic Field Coupling with Twisted Conducting Line by Expanded Chain Matrix”, Journal of Electrical Engineering & Technology, Vol.8, No.2, pp.364-370, Mar.01.2013.

1. Jong-Suk Ro*, Seung-Ki Hong, and Hyun-Kyo Jun, “Characteristic Analysis and Design of a Novel Permanent Magnetic Actuator for a Vacuum Circuit Breaker, IET Electric Power Applications, Vol.7, No.2, pp.87-96, Feb.01.2013.

[2012년01월] Dr. 노종석 삼성전자 퇴사 & 서울대 Post-Doctor 시작

[이하 1번-9번 논문은 Prof. 노종석 학위 과정 중 성과](개명전 영문명인 Jong-Seok Rho 로 게재)

9. Jung-Pil Lim, Jong-Seok Rho*, Kyung-Pyo Yi, Jung-Moo Seo, and Hyun-Kyo Jung, “Characteristic analysis of a traveling wave ultrasonic motor using an ellipsoidal static contact model”, Smart Materials and Structures, Vol.18, No.11, Nov.15.2009. (Ph.D Thesis of Dr. Ro)

8. Jong-Seok Rho*, Chang-Hwan Lee, and Hyun-Kyo Jung, “Characteristic analysis and design of a small size Rotary Ultrasonic Motor using the Cutting Method”, International Journal of Applied Electromagnetics and Mechanics, Vol.28, No.4, pp.469-500, Nov.18.2008.

7. Jong-Seok Rho*, Sang-Yeop Kwak, Tae-Kyung Chung, and Hyun-Kyo Jung, “Analysis of a nano positioning actuator using a numerical method combined with a analytic method”, International Journal of Applied Electromagnetics and Mechanics, Vol.28, No.3, pp.379-394, Sep.18.2008.

6. Jong-Seok Rho*, Chang-Hwan Lee, Tae-Kyung Chung, Chang-Hwan Im, and Hyun-Kyo Jung, “Analysis of a nanopositioning actuator using numerical and analytic methods”, Smart Materials and Structures, Vol.17, No.2, April.29.2008.

5. Jong-Seok Rho*, Chang-Hwan Lee, and Hyun-Kyo Jung, “Optimal design of ultrasonic motor using evolution strategy and finite element method”, International Journal of Applied Electromagnetics and Mechanics, Vol.25, No.1-4, pp.699-704, July.01.2007.

4. Jong-Seok Rho*, Kwang-il Oh, Hong-seok Kim, and Hyun-Kyo Jung, “Characteristic analysis and design of a B-14 rotary ultrasonic motor for a robot arm taking the contact mechanism into consideration”, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol.54, No.4, pp.715-728, April.01.2007.

3. Hyun-Woo Joo, Chang-Hwan Lee, Jong-Seok Rho, and Hyun-Kyo Jung, “Analysis of temperature rise for piezoelectric transformer using finite-element method”, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol.53, No.8, pp.1449-1457, Aug.01.2006.

2. Jong-Seok Rho*, Byung-Jai Kim, Chang-Hwan Lee, Hyun-Woo Joo, and Hyun-Kyo Jung, “Design and characteristic analysis of L1B4 ultrasonic motor considering contact mechanism”, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol.52, No.11, pp.2054-2064, Nov.01.2005.

1. Hyun-Woo Joo, Chang-Hwan Lee, Jong-Seok Rho, and Hyun-Kyo Jung, “Identification of material constants for piezoelectric transformers by three-dimensional, finite-element method and a design-sensitivity method”, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol.50, No.8, pp.965-971, Aug.01.2003.

Conference Papers

Since 2018

[2021]

4. 유재원, 노종석*, "전기기기 최적설계를 위한 새로운 근사모델 기반 다목적 함수 최적화 알고리즘", 2021 대한전기학회 하계학술대회, 평창, 한국, July.14-17, 2021.

3. 강병현,노종석*, "유한요소법을 이용한 압전 액추에이터 특성 해석", 2021대한전기학회 하계학술대회, 평창, 한국, July.15.2021.

2. S. S. H. Bukhari, and Jong-Suk Ro*, "Cost-Effective Sub-Harmonic-Based Brushless Wound Rotor Synchronous Machine Topology," 2021 KIEE Summer Conference, Pyeongchang, South Korea, July.14-17, 2021.

1. S. S. H. Bukhari, and Jong-Suk Ro*, "Sub-Harmonic Field Excitation Technique for Wound Field Synchronous Machines," 2021 KIEE Spring Conference, Jeju, South Korea, May. 2021.

[2019]

7. Dong-Kyu Lee, and Jong-Suk Ro*, "Analysis and Design of Universally Applicable Traction Motor for Heavy-Duty Vehicles”, MT26 International Conference on Magnet Technology 2019, Vancouver, Canada, Sep. 22-27, 2019.

6. 탁병오, 노종석*, “전기자동차 인휠시스템용 전동기 특성 해석 및 설계”, 대한전기학회 하계학술대회, 고성, 한국, July.12.2019.

5. 이동규, 노종석*, “전기버스 및 트레일러용 고토크 견인전동기의 특성 해석 및 설계”, 대한전기학회 하계학술대회, 고성, 한국, July.12.2019.

4. 심민섭, 노종석*, “Design and Analysis of Synchronous Reluctance Motor”, 대한전자공학회 하계학술대회, 제주, 한국, Jun.28.2019.

3. 권태훈, 노종석* “카메라 손 떨림 보정용 VCM 액추에이터 특성 해석,” 대한전자공학회 하계학술대회, 제주, 한국, Jun.28.2019.

2. ByungOh Tak, and JongSuk Ro*, “Analysis and Design of an Axial-Flux Permanent Magnet Motor for an In-wheel System of an Electric Vehicle”, ITEC Asia-Pacific Conference, Jeju, South Korea, May.09.2019.

1. Dong-Kyu Lee, and Jong-Suk Ro*, “Design of Delta Type Interior Permanent Magnet Traction Motor for Electric Bus and Trailer”, ITEC Asia-Pacific Conference, Jeju, South Korea, May.09.2019.

[2018]

3. Min-Seob Sim, and Jong-Suk Ro*, “Analysis and Design of an Eddy Current Brake for an Actuator of High Voltage Direct Current Circuit Breaker”, IEEE Conference on Electromagnetic Field Computation(CEFC 2018), Hangzhou, China, Oct.31.2018.

2. Hyuk-Sung Kwon, Jong-Suk Ro, and Hyun-Kyo Jung, "Influence of a Rotor Eddy Current on Performance of a Vernier Permanent-Magnet Machine", 21st International Conference on Electrical Machines and Systems (ICEMS), Jeju, South Korea, Oct.07-10,2018.

1. Jae-Woo Kang, Jong-Suk Ro, Hyuk-Sung Kwon, and Hyun-Kyo Jung, "Design of an AC Magnetic Contactor with a Permanent Magnet", 21st International Conference on Electrical Machines and Systems (ICEMS), Jeju, South Korea, Oct.07-10,2018.

출원 특허

18. 인-휠 다이렉트 드라이브 기능을 위한 새로운 고정자 구조를 가진 하이브리드 여자 자속 스위칭 기기(Outer Rotor Hybrid Excited Flux Switching Machine for in-wheel Direct Drive Application with novel stator structure), Application number(출원 번호)10-2020-0162500, KOR, 2020.11.27.

17. 의류 처리 장치(FABRIC TREATMENT APPARATUS), Application number(출원 번호)10-2020-0162493, KOR, 2020.11.27.

16. 머신러닝과 비콘을 이용한 실내 위치 파악 방법(Indoor positioning way using machine learning and beacons), Application number(출원 번호)10-2019-0170173, KOR, 2019.12.18.

15. 생체반응 정보의 강화학습을 통한 오류 검출 시스템 및 그 방법(Error Detection System through Enhanced Learning of Biometric Information), Application number(출원 번호)10-2019-0170170, KOR, 2019.12.18.

14. AR/VR 기반 사용자 친화적인 건물 내 에너지 및 물적자산 관리 시스템(AR/VR-based user-friendly in-building energy and physical asset management system), Application number(출원 번호)10-2019-0163579, KOR, 2019.12.10.

13. 증강현실을 통한 모바일 실내 네비게이션 시스템(Mobile Indoor Navigation System through Augmented Reality), Application number(출원 번호)10-2019-0163578, KOR, 2019.12.10.

12. 고압 직류송전 시스템 차단기용 브레이크 장치 및 이를 구비한 고압 직류송전 시스템 차단기(BRAKE APPARATUS FOR HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH BI-DIRECTIONAL BRAKING AND STOPPING FUNCTION BY LEAF SPRING AND HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH THE SAME), Application number(출원 번호)10-2019-0148774, KOR, 2019.11.19.

11. MSM 소자를 구비한 연료 분사장치(FUEL INJECTOR WITH MSM ELEMENT), Application number(출원 번호)10-2019-0145853, KOR, 2019.11.14.

10. 듀얼 MSM 소자를 구비한 휴대단말기 카메라용 액추에이터 및 이를 구비한 휴대단말기용 카메라모듈(ACTUATOR FOR MOBILE TERMINAL CAMERA WITH DUAL MSM ELEMENTS AND CAMERA MODULE FOR MOBILE TERMINAL WITH SAME), Application number(출원 번호)10-2019-0142595, KOR, 2019.11.08.

9. 판스프링에 의해 양방향 제동 및 정지 기능을 갖는 고압 직류송전 시스템 차단기용 톰슨코일 액추에이터 및 이를 구비한 고압 직류송전 시스템 차단기(THOMSON COIL ACTUATOR FOR HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH BI-DIRECTIONAL BRAKING AND STOPPING FUNCTION BY LEAF SPRING AND HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH THE SAME), Application number(출원 번호)10-2018-0157174, KOR, 2018.12.07.

8. 혈관 탐지 장치(DEVICE FOR DETECTION OF BLOOD VESSEL), Application number(출원 번호)10-2016-0066917, KOR, 2016.05.31.

7. Ultrasonic motor( 초음파 모터), Application number(출원 번호)10-006736.2, EP, 2010.06.29.

6. Ultrasonic motor and manufacturing method of the same (초음파 모터와 이의 제조 방법), Application number(출원 번호)12824661, US, 2010.06.28.

5. Optical image stabilizer for camera lens module (카메라 렌즈 모듈을 위한 광학적 이미지 안정 장치), Application number(출원 번호)12793332, US, 2010.06.03.

4. Optical image stabilizer for camera lens module( 카메라 렌즈 모듈을 위한 광학적 이미지 안정 장치), Application number(출원 번호)10-164072.0, EP, 2010.05.27.

3. 초음파 모터 및 그 제조 방법(ULTRASONIC MOTOR AND METHOD FOR MANUFACTURING THE ULTRASONIC MOTOR), Application number(출원 번호)10-2009-0058419, KOR, 2009.06.29.

2. 카메라 렌즈 모듈의 손떨림 보정 장치(OPTICAL IMAGE STABILIZER FOR CAMERA LENS MODULE), Application number(출원 번호)10-2009-0048842, KOR, 2009.06.03.

1. 나노 포지셔닝 액추에이터(Nano Positioning Actuator), Application number(출원 번호)10-2005-0049728, KOR, 2005.06.10.

등록 특허

12. 듀얼 MSM 소자를 구비한 휴대단말기 카메라용 액추에이터 및 이를 구비한 휴대단말기용 카메라모듈(ACTUATOR FOR MOBILE TERMINAL CAMERA WITH DUAL MSM ELEMENTS AND CAMERA MODULE FOR MOBILE TERMINAL WITH SAME), Registration number(등록번호)10-2264881, KOR, 2020.06.08.

11. 자성 형상 기억 합금 액추에이터를 이용한 새로운 가솔린 엔진의 연료분사기(A Novel Gasoline Direct Injection (GDI) Engine Fuel Injector by using a Magnetic Shape Memory Alloy Actuator), Registration number(등록번호)10-2232823, KOR, 2021.03.22.

10. 고압 직류송전 시스템 차단기용 브레이크 장치 및 이를 구비한 고압 직류송전 시스템 차단기(BRAKE APPARATUS FOR HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH BI-DIRECTIONAL BRAKING AND STOPPING FUNCTION BY LEAF SPRING AND HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH THE SAME), Registration number(등록번호)10-2248199, KOR, 2020.04.28.

9. 판스프링에 의해 양방향 제동 및 정지 기능을 갖는 고압 직류송전 시스템 차단기용 톰슨코일 액추에이터 및 이를 구비한 고압 직류송전 시스템 차단기(THOMSON COIL ACTUATOR FOR HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH BI-DIRECTIONAL BRAKING AND STOPPING FUNCTION BY LEAF SPRING AND HIGH VOLTAGE DC TRANSMISSION SYSTEM CIRCUIT BREAKER WITH THE SAME), Registration number(등록번호)1020988870000, KOR, 2020.04.02.

8. 혈관 탐지 장치(DEVICE FOR DETECTION OF BLOOD VESSEL), Registration number(등록번호)1018799340000, KOR, 2018.07.12.

7. Optical image stabilizer for camera lens module(카메라 렌즈 모듈을 위한 광학적 이미지 안정 장치), Registration number(등록번호)02259571, EP, 2018.03.07.

6. 초음파 모터 및 그 제조 방법(ULTRASONIC MOTOR AND METHOD FOR MANUFACTURING THE ULTRASONIC MOTOR), Registration number(등록번호)1016538260000, KOR, 2016.08.29.

5. 카메라 렌즈 모듈의 손떨림 보정 장치(OPTICAL IMAGE STABILIZER FOR CAMERA LENS MODULE), Registration number(등록번호)1015730730000, KOR, 2015.11.24.

4. Ultrasonic motor(초음파 모터), Registration number(등록번호)02270893, EP, 2015.08.05.

3. Optical image stabilizer for camera lens module (카메라 렌즈 모듈을 위한 광학적 이미지 안정 장치), Registration number(등록번호)08665339, US, 2014.03.04.

2. Ultrasonic motor and manufacturing method of the same(초음파 모터와 이의 제조 방법), Registration number(등록번호)08044554, US, 2011.10.25.

1. 나노 포지셔닝 액추에이터(Nano Positioning Actuator), Registration number(등록번호)1007101400000, KOR, 2007.04.16.

학부 과목

[4학년2학기] 종합설계

[4학년1학기] 전기기기 및 응용 (영어수업)

[3학년2학기] 에너지변환공학 (영어수업)

[3학년2학기] 아날로그 및 디지털회로 설계실습

[3학년1학기] 전자회로 설계실습

[2학년2학기] 회로및시스템 (영어수업)

[1학년1학기] 기초 컴퓨터 프로그래밍 (영어수업)

[1학년 1,2학기] CAU 세미나

[참여식 프로젝트] 다빈치 아카데미(창의학점제)

[참여식 프로젝트] Practical Education(PE) Program

[참여식 프로젝트] Always-on 프로젝트

[참여식 프로젝트] 올레길 프로젝트

대학원 과목

인공지능 기반 지능형 에너지 시스템 (영어수업)

전기자동차 (영어수업)

최적화 이론 및 응용 (영어수업)

에너지안보중심의 생산과 분배전략 (영어수업)

인공지능을 활용한 IoT 및 웨어러블에너지 디바이스 최적 설계 (영어수업)

가상 스마트 에너지 도시 시뮬레이션 (영어수업)

IOT시스템용 에너지시스템 공학 (영어수업)

신재생에너지와 디지털 트윈즈 개요 (영어수업)

에너지변환공학 (영어수업)

전기에너지공학 (영어수업)

외부강연

('21/04) [삼성전자] 휴대폰 카메라용 액추에이터 전문가/실무자 교육 및 양성

('19/07) [현대자동차] 1.지능형 에너지 변환 시스템 개론, 2. 전기차 개발 방향/전략 및 인휠 견인전동기 개론

('18/11) [삼성전자] 휴대폰 카메라용 액추에이터 전문가/실무자 교육 및 양성 (온라인 배포용)

('18/08) [삼성전자] 휴대폰 카메라용 액추에이터 전문가/실무자 교육 및 양성

('18/06) [한국전기연구원] 최적화 알고리즘 및 최적 설계

전체메뉴

MEMBER Electrical Energy Application Lab

Professor

저서

SCI(E) Indexed Papers

Conference Papers

출원 특허

등록 특허

2021년8월 이후 업데이트 중단

[수행중]지능형 에너지산업 융합대학원 (에너지 전문인력양성사업)

[수행중]전기설비 화재영향 분석기술 개발

[수행중]BK4 지능형 에너지산업 교육연구단

[수행중]박사과정생 연구장려금지원 사업 (전문인력양성사업)

[수행중]새로운 최적화 알고리즘을 이용한 단일 역률 동작이 가능한 새로운 유도기 최적 설계 (해외 우수신진연구자유치사업)

[수행중]전력 시스템의 센서 구동을 위한 새로운 압전 에너지 하베스터 개발

[수행중]신재생에너지 디지털 트윈 비즈 플랫폼 개발 고급트랙 (전문인력양성사업)

[수행중]산업융합형 웨어러블 스마트 디바이스 전문인력양성사업

박사급 연구인력 지원사업

새로운 액추에이터를 이용한 차세대 카메라 모듈 개발 (실용화개발 지원사업)

전기버스 및 트레일러용 고토크 견인전동기 개발

새로운 액추에이터를 이용한 차세대 카메라 모듈 개발 (실용화개발 지원사업)

우수 신진 연구자

오픈소스기반 및 결합해석 프로그램 개발 (한국전기연구원 연구인력 양성사업)

투입상태 유지 시 전력소모가 없는 영구자석형 전자접촉기 개발

HVDC 전력시스템의 안전 및 제어를 위한 HVDC 차단기용 액추에이터 시스템 개발

차세대 스마트 에너지 시스템 실전문제연구단

차세대 에너지 변환 시스템 개발

학부 과목

대학원 과목

외부강연